| All Products : MicroFlow NMR : FAQ (click on keyword below) |
| How will CapNMR reduce sample preparation time in my laboratory? |
|
Traditional Samples - 5mm Tube |
Capillary-scale Samples |
||
|
100 micrograms required |
less than 1 microgram needed |
||
| Performance | Convenience | Applications | Economic |
| Mass Sensitivity | Sample Consumables | LC for NMR | Tube Cost |
| Coil Architecture | Equipment Needed | Library QC | Sample Utilization |
| Low Power | Loading | Certificates | Reagent Cost |
| Short Pulse Width | Recovery | Multi-User NMR | Sample Prep Time |
| Acquisition Time | Vendor Neutral | Magnet Time | |
| Fluidic Cycle Time | Operating Cost | ||
| Active Volume | Maintenance | ||
| Fill Factor | |||
| Protasis CapNMR | 1mm Tubes | ||
|
|
S/N = XXX | S/N = YYY | |
| Coil Architecture |
Solenoid coils have high Q and an intrinsic sensitivity advantage. |
Traditional Helholtz coil |
|
| Active Volume / Fill Factor |
50% / ____ |
___% / ____ | |
| Fluidic Cycle Time (automated) |
1 minute |
|
|
| Spectral Acquisition Time | |||
| Vendor Neutral |
Varian, Bruker and JEOL |
||
| Sample Consumables |
|
|
|
| Sample Utilization |
only 7 uL from prepared well plates. 1 ug typical. |
||
| Reagent Cost | |||
| Tube Cost |
None! Use the money to buy a liquid handler instead! |
||
| Magnet Time | |||
| Sample Loading |
|
||
| Sample Recovery | Easy, automated | Difficult | |
| Applications | |||
| LC for NMR | direct from LC fractions to LEAP liquid handler | ||
| Library QC | go directly from microplate wells to quality spectra! |
|
|
| Cost of Operation |
|
||
| Equipment Needed |
|
||
| Contact Us: 508-481-4163 info@protasis.com ©2004 Protasis Corporation. All rights reserved. | |||